CtrlTech, become dealer for of Aerial, Germany Dehumidifier in UAE.

CtrlTech offer wide range of dehumidifier in UAE. Aerial, Germany is reputed manufacturer of all kinds of Portable dehumidifier & industrial. Aerial offer small portable dehumidifier, Industrial dehumidifier, Dehumidifier for warehouse and dehumidifier for swimming pool.

Aerial, Germany has appointed Control Technologies FZE (CtrlTech) as their exclusive dealer for UAE, Oman, Qatar, Kuwait and other parts of Middle East.

CtrlTech, UAE Becomes dealer for Aerial, Germany Industrial Dehumidifier in UAE.

Aerial Industrial dehumidifier in UAECtrlTech is specialized in the field of dehumidifier from last 7 years. CtrlTech offers solution for Power, Cooling , Monitoring  & Dehumidification for critical applications. Now association of Aerial with CtrlTech reach at its best. CtrlTech proud to be represent Aerial in region.

Product range by Aerial Dehumidifier, Germany.

As dehumidification industry leader Aerial , Germany offers condensation dehumidifier and Absorption type dehumidifier for various applications. Condensation type dehumidifier consists of refrigeration circuit with evaporator coil, compressor etc. This type of dehumidifier is suitable for dehumidification at higher temperature. As name suggest Absorption type dehumidifier, absorbs physical water present in air with help of wheel made up of desiccant material. Hence Absorption type dehumidifier also called as Desiccant dehumidifier. Desiccant dehumidifier are recommended for dehumidification at lower temperature applications such as cold room, pharmaceutical Industries and Food Industries. CtrlTech offers Aerial, Germany Dehumidifier in UAE exclusively.

Features of Aerial Dehumidifier (condensation type):

Aerieal Dehumidifier in QatarAerial Dehumidifier products has some of the distinguishing features than make them stand out in crowed of other dehumidifier manufacturers. All Condensation type Aerial has following distinguishing  features:

  • Aerial Industrial dehumidifiers has Axial fan with aluminum fan wheel. This is with winding protection.
  • Compressor offered in condensation Industrial dehumidifier are Rotary compressor which is hermetically sealed. Overload protection for compressor and it is with vibration-insulated bearings.
  • Condenser and evaporator made from copper piping and covered with aluminum fins
  • Cooling circuit made up of copper piping with capillary tube and filter dryer.
  • Automatic hot-gas defrosting, controlled by Dry-logic.
  • Body casing is made up of Aluminium, powder-coated with cover Aluminium anodizes. It is easy to dismantle and comply protection class of IP X4.
  • Tank full indication.
  • Hygrostat with nob to set desired humidity level.
  • Condensate pump.

Ase Series Dehumidifier in UAEFeatures of Aerial Dehumidifier (Desiccant type):

Mode of operation: The sucked room air is led by the turning sorption rotor (= process air). The humidity taken up by the rotor is led out by a heated towards air fl ow (= regeneration air). The air flow is heated by a dynamic, safe and self-regulating PTC heating element. That reg.-air must be led from the room / building.

Rotor ECODRY G3-MH / PTC heater: The sorption rotor is a High performance rotor, coated with metal silicate optimized for maximum water absorption with different entrance conditions. The rotor offers a very large surface as compared to dehumidifier. The mechanical fi rmness of the surface is extremely high. The rotor is not inflammable, very large surface as compared to dehumidifier. The mechanical firmness of the surface is extremely high. The rotor is not inflammable, maintenance-free and washable. Dynamic, safe and self-regulating PTC heating element. CtrlTech offer desiccant dehumidifier in UAE.

Different Models of Aerial Dehumidifier:

Aerial dehumidifier offers following model of Industrial dehumidifier.

  •  AD 1 Series: AD 1 series industrial dehumidifier has compact and space saving size. It is available in capacity of 10 & 20 liter/day (30ºC, 90%RH). It has stainless steel casing. It looks very elegant and it can be wall mount. It has hygrostat to set required humidity and hour counter. This is cheapest dehumidifiers by Aerial Dehumidifier.
  • AD 2 Series: AD 2 series dehumidifier also had space saving compact design and it can be wall mounted. Due to it high air circulation rate it use in laundry rooms. It is available in capacity of 30 & 50 liter/day (30ºC, 90%RH). It is based on BlueDry technology and uses Hot-gas deforsting. It can be use low temperature application as 8ºC.  This model also has hygrostat and hour counter.
  • AD 4 Series: This dehumidifier comes with large water tank with automatic shut-off when water tank get full. It is available in Industrial Dehumidifier made in GErmanycapacity of 20 & 30 liter/day (30ºC, 90%RH).  AD4 Series dehumidifier are light in weight and best performance with quite operation.
  • AD 5 Series: AD 5 series dehumidifier built with very dependable and durable body structure. It is available in capacity of 50 & 80 liter/day (30ºC, 90%RH).  It has high air circulation rate. It has reciprocating compressor with hygrostat and hour counter.
  • AD 7 Series: It is most sold dehumidifier in UAE. Body made up of strong plastic casing with big service wheels.  It is available in capacity of 55 & 80 liter/day (30ºC, 90%RH).
  • AD 8 Series: It is most rugged industrial dehumidifier in UAE amongst all aerial dehumidifier. It consists of two axial fan and energy saving reciprocating compressor.  It is available in capacity of 100 liter/day (30ºC, 90%RH). It has build in condensate pump.
  • AP Series: This dehumidifier is use for Swimming pool application. AP series dehumidifier has elegant slim designe and it can be floor mount or wall mount. It is available in capacity of 50 & 70 liter/day (30ºC, 90%RH) with hygrostat and hour counter. Ctrltech is one stop for dehumidifier in UAE.

    Your Name*

    Your Email*

    Mobile No.*

    Delivery Address*

Share

Wall mount Dehumidifiers for Swimming pools.

In our past many articles we have discussed different types of dehumidifiers for swimming pools. In this article we will explore wall mount type swimming pool dehumidifiers. SPD series ceiling mount ducted type dehumidifier is best option for any swimming pool. But in certain cases when there is no option of ceiling mount then we have to think of wall mount option. CtrlTech offers AP series of wall mount dehumidifier.

Features of Wall mount Swimming pool Dehumidifiers.

Indoor swimming pool room dehumidification is complex job and it need to be address by experts only. Right choice of swimming pool dehumidification equipment will solve issue of high humidity once for all or it might turn into nightmare. AP series unit offered by us is slim in design. Provided with wall mount brackets. AP series residential swimming pool dehumidifier. For Large pool we have SPD series swimming pool dehumidifiers.

 

Swimming pool Dehumidifiers in Dubai, UAE.

AP series indoor swimming pool dehumidifier provided with control panel. Control panel has indication of power on/off, desfrost mode, over temperature and hygrostat to set required humidity level. Humidity level can set between 20 to 80% RH. When humidity level in indoor pool room reaches to set humidity level, dehumidifier will switch of automatically. This unit has automatic defrosting system. In event of ice forming on coil, dehumidifier automatically switch on to defrosting mode. AP series swimming pool dehumidifiers are offered in two capacities. It has thickness of only 26 centimeter and weight of 54 kgs only. Unit has option of mixing fresh air too. It has elegant look and easily match with our interiors. Unit can be wall mount or floor mount also. Radial fan with winding protection provided for low noise and efficient operation. Unit equipped with rotary compressor which is fully hermetically sealed  to protected against overloading. Also compressor place on vibration-insulated bearings.

Controls Panel of AP Dehumidifier.

Dehumidifiers for swimming poolsControl Panel of AP series dehumidifiers for swimming pools has following controls:

  1. On/Off Switch.
  2. Single lamp to show if power connection is on or off.
  3. Single lamp for defrost mode. When unit runs on defrost mode then this green lamp will glow.
  4. Signal Lamp to show ambient temperature out of range. When ambient temperature above 32 deg C, then compress or will shut down and this red lamp will glow.
  5. Signal lamp to indicate that set humidity is reached. When room humidity equal to set humidity then dehumidifier will go in sleep mode and this yellow lamp will glow.
  6. Hygrostat to sent required humidity level. Humidity can be set between 20% to 80% RH.

Also unit has opening from back side for fresh air intake if needed and drainage connection.

Advantages and disadvantages of wall mount dehumidifiers for swimming pools.

  • Wall mount swimming pool dehumidifiers save space.
  • Esthetically wall mount dehumidifier looks good.
  • Wall mount dehumidifiers has limitation of capacity and airflow.
  • It can be use for small residential swimming pool only.

To Know more about swimming pool dehumidifiers then please contact us.

CONTROL TECHNOLOGIES FZE (Ctrltech)
PO Box 122271,
Sharjah, UAE.
T: +971 6 5489626
Mobile: +971 50 1537113 / +971 55 2338912
F: +971 6 5489627
E: sales@ctrltechnologies.com 
W: www.ctrltechnologies.com
Product website: http://www.dehumidifier-uae.com

Your Name*

Your Email*

Mobile No.*

Delivery Address*

Share

CtrlTech Launched CDM series Industrial Dehumidifier.

CtrlTech has launched new CDM series of industrial dehumidifier after completing beta test at various sites. CDM Series dehumidifiers will be available in two capacities; 90 & 50 L/day. Strong metal body, LCD control panel, strong wheel is some of the great features of CDM series Dehumidifier.

CDM series Industrial dehumidifier.

Description of CDM Series Dehumidifiers.

CMD-50LCDM series industrial portable dehumidifier has rugged construction which suitable for use in industrial and construction applications. Body is made of  powder coated metal, 1.2mm real thickness, fire resistant. Strong universal Wheels with decorative handle at top for each movement of unit. CDM pool dehumidifier has front intake of air and side dry air discharge. Unit has delayed start up for protections. Unit has automatic built-in defrosting system. LCD display of CDM pool dehumidifier has built-in humidistat and you can set humidity between 30% to 95%RH. Unit has facility to connect pump as option. CDM series commercial duty dehumidifiers consists of energy efficient rotary compressor with environment friendly R410 refrigerant gas. CDM-90L dehumidifiers has maximum power consumption of 1260W while CDM-50L has maximum power consumption of 700W only. Airflow of CDM-90L large dehumidifier and CDM-50L industrial dehumidifier are 850 and 450 CMH respectively. Both unit runs on 220V, 1phase, 50Hz supply. CDM series industrial dehumidifier unit also can be use as indoor swimming pool dehumidifier.

Functioning of Control Panel of CDM pool dehumidifier.

CDM series indoor pool dehumidification system is provided with beautiful colour LDC control panel. In this section we will control panel of CDM series pool dehumidifier.understand function of each button on control panel of CDM industrial dehumidifier and its features:

“Power” button: Press this button to start the CDM pool dehumidifier, it enters start-up mode after the buzzer buzzes twice Press this button to stop the machine, it enters stop mode after the buzzer buzzes once.

“Time” button: Press this button for once, and it enters the mode of current time setting; Press this button for successively twice, it enters the mode of pre-set start-up; Press this button for successively three times, it enters the mode of pre-set stop; Press this button for successively four times, it exits the mode of time pre-setting. 

“+” button: Press this button on control panel of CDM dehumidifiers directly to increase the set humidity. Buzzer buzzes once for each pressing and the set humidity increases by 1%RH. Successive operation can be achieved by pressing this button successively. Press “Time” button before pressing this button, the time (hour) can be increased.

“-” button: Press this button directly to decrease the set humidity of CDM industrial dehumidifier. Buzzer buzzes once for each pressing and the set humidity decreases by 1%RH. Successive operation can be achieved by pressing this button successively. Press “Time” button before pressing this button, the time (minute) can be decreased. CDM series commercial duty dehumidifiers control panel is coloured one.

To know more about CDM series industrial dehumidifier, please contact us at +971 50 1537113 or write us at sales@ctrltechnologies.com

CONTROL TECHNOLOGIES FZE (Ctrltech)
PO Box 122271,
Sharjah, UAE.
T: +971 6 5489626
Mobile: +971 50 1537113 / +971 55 2338912
F: +971 6 5489627
E: sales@ctrltechnologies.com 
W: www.ctrltechnologies.com
Product website: http://www.dehumidifier-uae.com

Your Name*

Your Email*

Mobile No.*

Delivery Address*

Home of Industrial dehumidifier.

Share

Dehumidifier for Swimming Pool and Spa.

High humidity is major problem in any indoor swimming pool. Swimming pool dehumidifier helps to reduce humidity in indoor pool area and improves environment.

Dehumidifier For swimming Pool:

Dehumidifiers for swimming pool are generally of Ducted ceiling mount type. For Small swimming pool we can use wall mount type dehumidifier also. Humidity generated in Swimming pool area is depends on surface area of swimming pool,

Dehumidifier for swimming pool & Spa.

Temperature of water in Swimming pool, Number of person in indoor swimming pool area. If size of swimming pool (length & width) is high then more water surface comes in contact with air and more evaporation will happen. Which will increase humidity in indoor pool area and size of Dehumidifier for Pool Room will be higher. Temperature of water in swimming pool is major factor which will decide evaporation rate and hence humidity level in room. In other word Swimming Pool Dehumidifier Sizing is majorly depend on evaporation rate due to temperature of water in pool. Humidity added by number of people in not that much matter of concern while sizing residential indoor pool dehumidifier but it will matter a lot while sizing commercial swimming pool dehumidifiers.

Swimming pool Dehumidifiers Type:

different type of dehumidifier generally used for indoor swimming pool dehumidification. In this section we will discuss most commonly use ceiling mount type pool room dehumidification systems.

Ducted type Swimming Pool Dehumidification Systems:

Ducted type dehumidifiers are more desired type of indoor pool room dehumidifier among all types dehumidifier. Ducted type dehumidifier are generally mount above ceiling. It can be connected with ducting of air conditioner or it can be connected independently. If this dehumidifier connected in parallel to supply or return duct then performance of this dehumidifier will be fine as long as air conditioner is on. But in case of Independent mode connection performance of dehumidifier doen’t depend on working of air conditioner.

Indoor pool dehumidifier price. Dehumidifier sizing

Ceiling mount indoor pool room dehumidifier is provided with wall mount LCD hygrostat controller. From this controller we can set required humidity. To know more about Dehumidifier for swimming pool, please contact us.

CONTROL TECHNOLOGIES FZE (Ctrltech)
PO Box 122271,
Sharjah, UAE.
T: +971 6 5489626
Mobile: +971 50 1537113 / +971 55 2338912
F: +971 6 5489627
E: sales@ctrltechnologies.com 
W: www.ctrltechnologies.com
Product website: http://www.dehumidifier-uae.com

 

Your Name*

Your Email*

Mobile No.*

Delivery Address*

Share