Wall mount Dehumidifiers for Swimming pools.

In our past many articles we have discussed different types of dehumidifiers for swimming pools. In this article we will explore wall mount type swimming pool dehumidifiers. SPD series ceiling mount ducted type dehumidifier is best option for any swimming pool. But in certain cases when there is no option of ceiling mount then we have to think of wall mount option. CtrlTech offers AP series of wall mount dehumidifier.

Features of Wall mount Swimming pool Dehumidifiers.

Indoor swimming pool room dehumidification is complex job and it need to be address by experts only. Right choice of swimming pool dehumidification equipment will solve issue of high humidity once for all or it might turn into nightmare. AP series unit offered by us is slim in design. Provided with wall mount brackets. AP series residential swimming pool dehumidifier. For Large pool we have SPD series swimming pool dehumidifiers.

 

Swimming pool Dehumidifiers in Dubai, UAE.

AP series indoor swimming pool dehumidifier provided with control panel. Control panel has indication of power on/off, desfrost mode, over temperature and hygrostat to set required humidity level. Humidity level can set between 20 to 80% RH. When humidity level in indoor pool room reaches to set humidity level, dehumidifier will switch of automatically. This unit has automatic defrosting system. In event of ice forming on coil, dehumidifier automatically switch on to defrosting mode. AP series swimming pool dehumidifiers are offered in two capacities. It has thickness of only 26 centimeter and weight of 54 kgs only. Unit has option of mixing fresh air too. It has elegant look and easily match with our interiors. Unit can be wall mount or floor mount also. Radial fan with winding protection provided for low noise and efficient operation. Unit equipped with rotary compressor which is fully hermetically sealed  to protected against overloading. Also compressor place on vibration-insulated bearings.

Controls Panel of AP Dehumidifier.

Dehumidifiers for swimming poolsControl Panel of AP series dehumidifiers for swimming pools has following controls:

  1. On/Off Switch.
  2. Single lamp to show if power connection is on or off.
  3. Single lamp for defrost mode. When unit runs on defrost mode then this green lamp will glow.
  4. Signal Lamp to show ambient temperature out of range. When ambient temperature above 32 deg C, then compress or will shut down and this red lamp will glow.
  5. Signal lamp to indicate that set humidity is reached. When room humidity equal to set humidity then dehumidifier will go in sleep mode and this yellow lamp will glow.
  6. Hygrostat to sent required humidity level. Humidity can be set between 20% to 80% RH.

Also unit has opening from back side for fresh air intake if needed and drainage connection.

Advantages and disadvantages of wall mount dehumidifiers for swimming pools.

  • Wall mount swimming pool dehumidifiers save space.
  • Esthetically wall mount dehumidifier looks good.
  • Wall mount dehumidifiers has limitation of capacity and airflow.
  • It can be use for small residential swimming pool only.

To Know more about swimming pool dehumidifiers then please contact us.

CONTROL TECHNOLOGIES FZE (Ctrltech)
PO Box 122271,
Sharjah, UAE.
T: +971 6 5489626
Mobile: +971 50 1537113 / +971 55 2338912
F: +971 6 5489627
E: sales@ctrltechnologies.com 
W: www.ctrltechnologies.com
Product website: http://www.dehumidifier-uae.com

Your Name*

Your Email*

Mobile No.*

Delivery Address*

Share

AD 780 Series Industrial Dehumidifier review.

Ad 780 dehumidifier is industrial grade dehumidification system made in Germany. In this article we are going to review AD 780 dehumidifier in details.

Why we need industrial Dehumidification System.

AD 780 Industrial Dehumidifier for Dehumidification.Many industrial application need low humidity environment for maintaining quality of its processes. For example every other process in pharmaceutical industries required low humidity environment right from preparation to storage of medicine. High humidity can change quality and formulation of medicine.  Hence industrial dehumidifiers are commonly use in pharmaceutical industries. Similarly it is also use in storage of leather industries to preserve sheen of leather by protecting it from fungi, mould, microbial activity and mildew. Other important industrial sector where system is must have equipment is AD 780 industrial dehumidifiers.lithium battery industry. It is very important to maintain low humidity with help of dehumidifier in lithium battery storage because lithium easily reacts with water or moisture to form lithium hydroxide and heat. For Sizing of industrial dehumidification systems, please follow dehumidifier buying guide available on our website.

Features of AD 780 Industrial dehumidifiers.

Ad 780 industrial dehumidifiers are available in capacities of 78 lilter per day.  Body of AD 780 dehumidifier made up of impact proof plastic body. This dehumidifier has elegant integrated push-handle. Two wheels each of 30 cm diameter is provided. this is feature rich industrial dehumidification system. Condenser and evaporator of this unit has copper piping covered with aluminium fins. And dehumidification system’s  cooling circuit  made up of copper piping with capillary tube and filter dryer. Service connector on suction side. This dehumidifier unit provided with filter. Intake of air from back side while discharge of dry air from front side. AD 780 has control panel with humidistat to sent required humidity between 40% to 90% RH. Unit consists of axial fan with aluminium fan wheel. This axial fan is with winding protection. Fully hermetically sealed rotary compressor, protected against overloading, vibration insulated bearings. Rotary compressor is using R407c environmental friendly refrigerant gas. Control panel has on/of switch, illuminated neon switches for indication of  defrost, pump fault, normal running of unit. Unit has air circulation rate of 820 CMH. Unit runs of 230V, 50Hz power supply. Maximum power consumption of unit is 1250 watts. This unit is designed to work in 3 to 32 deg C temperature.  Dehumidifier units provided with 5 meter power cable with keeper.

Applications of AD 780 dehumidifier.

This dehumidifier can be use in all industrial application. some of application as follow:

  • Water work: this units can be use in water work side, water plants, laundry rooms etc.
  • Storage: Unit can be use in warehouse of food, medicine, cloth, leather etc.
  • Industrials processes: It can be use in Pharmaceutical, arms manufacturing process.
  • Swimming pool: Unit can be use for indoor swimming pool applications.

To know more about AD 780 series industrial dehumidifiers, please contact us at +971 50 1537113 or write us at sales@ctrltechnologies.com

CONTROL TECHNOLOGIES FZE (Ctrltech)
PO Box 122271,
Sharjah, UAE.
T: +971 6 5489626
Mobile: +971 50 1537113 / +971 55 2338912
F: +971 6 5489627
E: sales@ctrltechnologies.com 
W: www.ctrltechnologies.com
Product website: http://www.dehumidifier-uae.com

Your Name*

Your Email*

Mobile No.*

Delivery Address*

Home of Industrial dehumidifiers.

Share

CtrlTech Launched CDM series Industrial Dehumidifier.

CtrlTech has launched new CDM series of industrial dehumidifier after completing beta test at various sites. CDM Series dehumidifiers will be available in two capacities; 90 & 50 L/day. Strong metal body, LCD control panel, strong wheel is some of the great features of CDM series Dehumidifier.

CDM series Industrial dehumidifier.

Description of CDM Series Dehumidifiers.

CMD-50LCDM series industrial portable dehumidifier has rugged construction which suitable for use in industrial and construction applications. Body is made of  powder coated metal, 1.2mm real thickness, fire resistant. Strong universal Wheels with decorative handle at top for each movement of unit. CDM pool dehumidifier has front intake of air and side dry air discharge. Unit has delayed start up for protections. Unit has automatic built-in defrosting system. LCD display of CDM pool dehumidifier has built-in humidistat and you can set humidity between 30% to 95%RH. Unit has facility to connect pump as option. CDM series commercial duty dehumidifiers consists of energy efficient rotary compressor with environment friendly R410 refrigerant gas. CDM-90L dehumidifiers has maximum power consumption of 1260W while CDM-50L has maximum power consumption of 700W only. Airflow of CDM-90L large dehumidifier and CDM-50L industrial dehumidifier are 850 and 450 CMH respectively. Both unit runs on 220V, 1phase, 50Hz supply. CDM series industrial dehumidifier unit also can be use as indoor swimming pool dehumidifier.

Functioning of Control Panel of CDM pool dehumidifier.

CDM series indoor pool dehumidification system is provided with beautiful colour LDC control panel. In this section we will control panel of CDM series pool dehumidifier.understand function of each button on control panel of CDM industrial dehumidifier and its features:

“Power” button: Press this button to start the CDM pool dehumidifier, it enters start-up mode after the buzzer buzzes twice Press this button to stop the machine, it enters stop mode after the buzzer buzzes once.

“Time” button: Press this button for once, and it enters the mode of current time setting; Press this button for successively twice, it enters the mode of pre-set start-up; Press this button for successively three times, it enters the mode of pre-set stop; Press this button for successively four times, it exits the mode of time pre-setting. 

“+” button: Press this button on control panel of CDM dehumidifiers directly to increase the set humidity. Buzzer buzzes once for each pressing and the set humidity increases by 1%RH. Successive operation can be achieved by pressing this button successively. Press “Time” button before pressing this button, the time (hour) can be increased.

“-” button: Press this button directly to decrease the set humidity of CDM industrial dehumidifier. Buzzer buzzes once for each pressing and the set humidity decreases by 1%RH. Successive operation can be achieved by pressing this button successively. Press “Time” button before pressing this button, the time (minute) can be decreased. CDM series commercial duty dehumidifiers control panel is coloured one.

To know more about CDM series industrial dehumidifier, please contact us at +971 50 1537113 or write us at sales@ctrltechnologies.com

CONTROL TECHNOLOGIES FZE (Ctrltech)
PO Box 122271,
Sharjah, UAE.
T: +971 6 5489626
Mobile: +971 50 1537113 / +971 55 2338912
F: +971 6 5489627
E: sales@ctrltechnologies.com 
W: www.ctrltechnologies.com
Product website: http://www.dehumidifier-uae.com

Your Name*

Your Email*

Mobile No.*

Delivery Address*

Home of Industrial dehumidifier.

Share

Whole House Industrial Dehumidifier.

Recently we got enquiry from one of our client located at Palm Jumeirah for dehumidifier for his Villa. On phone client mentioned that they have problem of high humidity in their villa due to which there are problem of wetness on floor, water drop formation of ceiling and bad smell in whole villa. After site study we came to know that since villa is at Palm Jumeirah (which is very close to sea)whole house industrial dehumidifier

humidity in surrounding air is very high during summer and when this surrounding outside air enter in villa when windows are open, it bring high humidity which needs to be remove. We proposed our client a solution of “Whole house dehumidifiers”. Why we will find out in next section of this article.

In this article we will try to understand what is whole house industrial dehumidifiers, how to connect, when to use etc.

What is Whole House dehumidifiers?

In simple term a whole house industrial dehumidifiers mean a dehumidifier serving to whole house. It is ducted type of dehumidifier and can be connected in different configuration to serve purpose. This dehumidifier is economical as compared to portable dehumidifier. In above mentioned case study, Villa of client is located at sea shore and whole villa (not a specific room) has problem of high humidity. This high humidity is not only due to outside air which entering in villa due to opening of windows but also due to fresh air taken by air conditioning system. Fresh air taken by air conditioning system is surrounding high humid air which continuously increasing humidity level in villa. To address this issue there can be two solutions. First is to install portable dehumidifier in each room. And second solution is to install whole house dehumidifiers which will remove humidity from outside air which is entering villa as fresh air. Whole house unit can be connected in various configurations. It can be connected parallel to return and supply duct, it can be connected to treat fresh air.

whole house dehumidifier installation

Difference between Whole house Industrial Dehumidifiers and Portable Dehumidifier.

A Portable dehumidifier recommended when certain small area house has high humidity problem while Whole house dehumidifier system are use when high humidity is every where in house.

If high humidity problem is every where in house then using multiple portable dehumidifiers is more costly affaire than using single whole house unit.

We need to empty water container of portable unit every time when it full which is not in case of whole house unit.

Life of portable units are very less as compared to whole house unit. Whole house unit not only dehumidify air but also it filters air before entering in house. It is common practice in Europe to use whole house dehumidifier for basements.

Whole house unit are more economical, precise and more practical solution than multiple portable dehumidifier.

for More details please contact us:

Control Technologies FZE

PO Box 122271, SAIF Zone, Sharjah UAE.

Ph: +971 6 5489626

Mobile: +971 50 1537113 / 055 2338912

Email: sales@ctrltechnologies.com

 

Your Name*

Your Email*

Mobile No.*

Delivery Address*

Share

Difference between desiccant & refrigerant type Industrial dehumidifier.

Dehumidifier are classified on basis of principal of working, type of its use and type of mounting. On basis of use it commonly classified as home dehumidifier, industrial dehumidifier or commercial dehumidifier and Swimming pool dehumidifier. On basis of Mounting it defined as portable dehumidifier, ceiling mount, wall mount and floor mount dehumidifier. On basis of working principle dehumidifiers are mainly classified into refrigerant type and desiccant type dehumidifiers. In this article we will discuss difference between refrigerant type and desiccant type dehumidifiers.

Principle of Working or Refrigerant and Desiccant commercial dehumidifier.

Refrigerant type dehumidifier consists of compressor, condenser and evaporator coil. Humid air suck inside dehumidifier which passes over cold condenser coil where humidity in air condensed into physical water. This water stored in built in tank and dry air thrown out. Desiccant type dehumidifier consists of desiccant wheel, motor, process fan, reactivation fan, heater etc. Desiccant rotor

comparision between refrigerant type industrial dehumidifier and dessicant commercial dehumidifier.

 

moves continuously with help of motor-belt arrangement. Process fan draws humidity air which passes through desiccant wheel and humidity for air get absorbed by desiccant wheel. Dry air then thrown out. Due to absorption of humidity, desiccant wheel get wet which get dry by passing hot air with help of reactivation heater. wet air then thrown out of dehumidified space with help of reactivation fan.

Differences between refrigerant and desiccant industrial dehumidifier.

There are many distinguishing differences between desiccant and refrigerant type commercial industrial dehumidifiers. We will see all differenced between these commercial duty dehumidifiers one by one.

  • Industrial dehumidifier supplier in UAE.
  • Commerical Dehumidifier for swimming pool banner
  • Warehouse Dehumidifier supplier in Dubai.

Area of Use of refrigerant and desiccant commercial dehumidifier.

Refrigerant type Industrial portable dehumidifier are use in high temperature and high moisture areas where dehumidification to be achieve. Using refrigerant type large dehumidifier for low temperature areas can cause formation of ice on its coil which can reduces its dehumidification capacity. While desiccant type portable commercial dehumidifiers are use in low temperature and low moisture areas where dehumidification to be achieve. with help of desiccant type commercial dehumidifier we can achieve low humidity as 1% RH.

Dehumidifier price.

Desiccant type dehumidifier are more costlier than refrigerant type dehumidifier. for same capacity dehumidifier cost of desiccant dehumidifier can be three times than that of cost of refrigerant type dehumidifier.

Cost of Running.

Desiccant type commercial dehumidifier needs more electrical power than equivalent capacity of refrigerant type industrial dehumidifier.

Temperature of dry air.

In desiccant dehumidifier, heaters and fans has been used during process of dehumidification. Due to this dry air coming out of desiccant dehumidifier has high temperature which can increase temperature of space by 3 to 5 degree Celsius  which can become major issue if dehumidifier serving to large area. This will increase cost of air conditioning. While refrigerant type industrial dehumidifier gives out warm air which can increase temperature of space by 1 to 2 degreee Celsius only.

Send us Enquiry:

Your Name*

Your Email*

Mobile No.*

Delivery Address*

Share

Industrial dehumidifier capacity selection.

Selecting capacity of industrial dehumidifier is totally different than that of selection size of home dehumidifiers. Major difference is while selecting capacity of commercial dehumidifier not only we need to make note of factor that effecting humidity but also factors effecting industrial process before and after installing a dehumidifier. In this article we will try to understand approach to decide  suitable type and capacity of dehumidifier.

Factor effecting Capacity of Commercial dehumidifier.

CD-85L INDUSTRIAL DEHUMIDIFIER Capacity of dehumidifier is majorly depends on following parameters:

1) Volume of the space which need to be dehumidify: Capacity of industrial dehumidifier directly proportional to volume of space.

2) Temperature in space:  This parameter not only effect size of dehumidifier but also it is deciding factor for type of dehumidifier. If temperature in space which needs to be dehumidify is lower than 15 deg. C then in stead of traditional refrigerant type of dehumidifier,  we should recommend for desiccant type of dehumidifier.

3) Current humidity level in space: If present humidity level in space is high then dehumidifier has to do extra job to remove humidity from air and hence dehumidifier capacity will increase.

4) Fresh Air Added in Space: If HVAC system in facility is taking fresh air from outside and this fresh air is not treated then outside fresh air will bring humidity along with it. Hence amount of fresh air get added in system will also effect sizing of dehumidifiers.

5) Number of people working in space: Human body adds humidity in environment. If people in space is doing physical work then humidity added by human body will be more.

Commercial dehumidifier supplier in Dubai.6) Required humidity in space: Sizing of commercial industrial dehumidifiers will be bigger if we need to dehumidify space to lower humidity level. Dehumidifiers of home should size with required humidity of 50 to 60%RH. Portable commercial dehumidifiers should be size with required humidity of application.

Dehumidifiers Supplier in UAE.

CtrlTech is reputed Industrial dehumidifier manufacturers in UAE. They have wide range of dehumidifier from 10 to 1200 liters/day. Gamut of ctrltech consisting of portable dehumidifier, industrial large dehumidifier, commercial duty dehumidifiers, heavy duty dehumidifier, dehumidifier for swimming pools.

Share

Industrial Dehumidifier: Different applications.

In this article we are going to explore different applications of industrial dehumidifier in processes. Industrial dehumidifier also commonly know as commercial dehumidifier or commercial grade dehumidifier or heavy duty dehumidifier. Humidity control in industrial processes not only important for completion of process but also it does affect quality of end product of process.

industrial dehumidifier and commercial dehumidifier applications.

How to select Commercial dehumidifier for Industrial applications:

Industrial dehumidifier in UAE.To select right size of commercial dehumidifier we need to understand that industrial process. First step to note done current humidity level and required humidity level. Also we need to note down room temperature, amount of fresh air in CFM, no of people working, if there is water involved in process and if involved then is it hot or cold. All these factor will help us to reach right size of commercial dehumidifier. For Industrial applications dehumidifier should be heavy duty with strong and corrosion proof  body. Large Dehumidifier should have high operating temperature. Preferably commercial industrial dehumidifiers have inbuilt controller to set required humidity, speed control. Most importantly dehumidifier should have auto function which means commercial duty dehumidifiers will stop when room humidity reaches to set humidity and should start again when humidity in room becomes higher than set humidity. Industrial portable dehumidifier should have strong pneumatic type wheels and handle for easy movement. Ctrltech is reputed industrial dehumidifier manufacturers.

Different applications of dehumidifier for Humidity Control.

Dehumidifier used in many industrial applications. Some of the applications are as follow:

Fool industry: In food industry always low humidity is desired during production and in storage area. High humid environment in food storage area can give rise to mould an fungi. Warehouse storing pulses or dry fruits should have low-humidity level for maintaining quality of food. Also in chocolate industries and bakeries required low-humidity in production area and storage.

Museum & Archive Room: Museum and archive rooms stores high valuable material such as books, paintings, statues etc. High humid air in Museum and archive rooms can destroy artefacts or damage it beyond repair. Especially for books and paintings low humidity as much as 20% is desirable. High humidity in old car museum can cause rust on metal parts.

Equipment rooms: Many equipment are sensible to high humidity. Especially equipment consisting of electronics are desired to store in low humidity areas. High humid environment in plant room can cause rusting on costly equipment. High humid air in telecom room or datacentre can cause breakdown on equipment and servers. Dehumidifier should be use if manufactures of equipment suggest for low humidity for operating conditions of equipment. Portable commercial dehumidifiers are most suitable for this application.

Marin application: Due to always proximity to sea water, high humidity observed in marine ports, ships and marine industries. High humidity can cause rust of mechanical equipment’s, malfunctioning of electronic in ships. It is very important to control humidity in control dock of Ship. Marine standard dehumidifier should be installation in control room of ship.

Cold Room Storage: High humid environment, condensation is common problem in cold storage room. Desiccant dehumidifier should be install at construction stage of cold room to avoid these issues.

Some of other Applications of Industrial dehumidifiers are as follow:

*Ammunition Storage                                                                *Breweries
*Candy Manufacturing                                                              *Chemicals
*Chocolates                                                                                  *Corrosion Control
*Clean Rooms                                                                             *Defence Equipment’s
*Fertilizers                                                                                   *Machine Parts
*Films                                                                                           *Lithium Chloride Batteries
*Food & Food Packaging                                                          *Libraries
*Glass Laminating                                                                     *Leather
*Ice Rinks                                                                                    *Laboratories
*Indoor Arenas                                                                          *Wood Drying
*Military Applications                                                              *Welding Electrodes
*Military Equipment Storage                                                 *Water & Waste Water
*Milk Powder                                                                             *Typewriter Ribbons (Coating)
*Optical (Polishing)                                                                  *Tyre & Rubber Manufacturing
*Pharmaceuticals                                                                      *Tea & Coffee
*Photographic Materials                                                         *Steel-Belted Tyres
*Plant Lay-up                                                                            *Ship Lay-up
*Plastics                                                                                      *Semiconductor Components
*Powder Storage                                                                       *Seed Drying
*Pumping Stations                                                                   *Safety Glass
*Razor Blades                                                                           *Snack Foods

 

For any further query please contact us, we are one of reputed commercial dehumidifier manufacturers. We hope this article will help to select proper Industrial dehumidifier size.

Your Name*

Your Email*

Mobile No.*

Delivery Address*

Share